Aiwa LCX-151 Especificações descarregar pdf (Página 151)

143

on this unit. Your position and datum in use determines which one to

use. If you use standard, and your position is off significantly, then try

the alternate.

NOTE: When the position format is changed, it affects the way all

positions are shown on all screens. This includes waypoints.

To change the coordinate system, press

ENT while COORDINATE SYSTEM is

highlighted. Press the ↑ or ↓ keys to highlight the desired format. Press

ENT. Press EXIT to close the menu.

To setup Loran TD:

NOTE

If the Loran TD conversion is chosen, you must enter the local

Loran chain identification for the master and slaves. Do this by

selecting "Setup Loran TD" at the bottom of the "Coordinate

System" menu and select the ID. Press

EXIT to close this menu.

Configure Loran TD menu.

Map Fix

Map Fix is used with charts or maps. This system asks for a reference

position in latitude/longitude, which you take from a marked location

on the map. It then shows the present position as distance on the map

from that reference point.

For example, if it shows a distance of UP 4.00" and LEFT 0.50", you

then measure up four inches and to the left a half-inch from the

reference point on the map to find your location.

To configure a map fix:

To use this format, you need to follow these steps in order. First, take

your map of the area and determine a reference latitude/longitude.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 207 208

Sem comentários

Aiwa LCX-151 Especificações Página 151